PDF to STEP

A PDF is a drawing, not a solid. We rebuild it as a STEP file you can program from, or as a native model your team can edit.

Customer sent only a PDF? We rebuild the part as a STEP file you can program from, or as a native model in SolidWorks, Inventor, PTC Creo, or AutoCAD. Simple parts are delivered in 24 to 48 hours, from $65, with a free quote within 12 hours.

Why a PDF does not convert itself

A vector PDF carries lines and arcs. A scanned PDF carries pixels. Neither carries a solid, so there is nothing in the file to export as STEP. Automated PDF-to-STEP converters fail on engineering drawings for that reason. Our engineering team models the part from the dimensions the drawing states.

What we accept

  • Scanned PDF blueprints
  • Vector PDF technical drawings
  • Multi-sheet PDF drawing packages
  • PDF datasheets with dimensional tables

Paper prints, DWG, and DXF are covered on legacy drawing conversion.

What you receive

STEP AP242 — geometry as standard. Full PMI, GD&T, and model-based definition are available on request. AP203 and AP214 are available when you need them.

A native model with an editable feature tree on SolidWorks, Inventor, and PTC Creo. AutoCAD is delivered as a 3D solid, because AutoCAD has no comparable parametric feature manager. That is a property of the software, not a lesser service.

If your team works in CATIA, Siemens NX, Fusion 360, Onshape, or Solid Edge, we deliver STEP, IGES, or Parasolid. Those systems import the neutral file.

A 2D drawing in DWG, DXF, or PDF can be generated alongside the 3D model, dimensioned to ANSI Y14.5 or ISO 1101.

When the drawing is unclear

Ambiguity stops the job. Where the surrounding dimension chain leaves exactly one arithmetically possible value, we close it. That is arithmetic, not assumption. A value that merely looks plausible is still a guess, and it comes back to you as a question. Open points are batched into one written list. Queries pause the turnaround clock.

A second engineer checks each model before delivery. One revision round is included. Errors caused by our team are corrected at no charge within 30 days of delivery.

Time and price

Simple, 24 to 48 hours. A single machined part, roughly under 20 features. One bracket, one shaft, one plate.

Medium, 2 to 3 business days. A multi-feature part, or a small assembly of two to ten parts.

Complex, 4 to 6 business days. Assemblies over ten parts, or multi-sheet drawing sets.

Rush service returns in 12 to 24 hours when we receive files before 11am, subject to availability. These ranges assume a drawing we can read without coming back to you.

Paper drawing or PDF to STEP starts at $65. That figure is a floor. The quote is fixed, and it depends on complexity, source quality, and output requirements. An NDA is available on request, signed by our operating company for your region. Files up to 5 MB go through the quote form. Larger files can be emailed to uploads@cadto3d.com.

Upon full payment you receive full ownership of the deliverables, and we retain no rights in them.

Related

Hub: Legacy drawing conversion

Also: 2D to 3D CAD conversion · STEP file modeling · STEP file format

Ready to get started?

Free quote within 12 hours.